Sony DSR-200A Manual Do Utilizador

(1) Set the POWER switch to ON and then set CAMCORDER/VTR to VTR.
(2) Open the cover, press 

·, then ) or 0, to search for the start and end

points of the recording.

(3) Press P at the start point of the recording.
(4) Press AUDIO DUB 

.

(5) Adjust the recording volume.
(6) Press P.

Audio dubbing begins.
If you are using an audio source input, press P on the stereo at the same time.

Press π.

Press P.  To start recording again, press P.

If you set REC LEVEL to AUTO, the volume is automatically adjusted.
To adjust the volume manually, set REC LEVEL to MANU, and turn the REC LEVEL
dials.

Note on audio dubbing
You cannot operate audio dubbing on DV-formatted tapes.  Depending on signal
conditions, you may not be able to operate audio dubbing even on DVCAM-formatted
tapes.

: Signal flow

AUDIO

DUB

PAUSE

REW

PLAY

FF