Yamaha YHT-S400 AYHTS400BL Manual Do Utilizador

■ Pairing

For details, refer to the instruction manual of Yamaha 
Bluetooth wireless audio receiver.

DOCK to set the input to DOCK.

Turn on the Bluetooth component you 
want to pair with, and then enter pairing 
mode.
Refer to the instruction manual of your Bluetooth 
component for details.

OPTION.

OPTION menu for DOCK input appears in the 
display.

“Searching...” appears when the pairing starts. 
While the Yamaha Bluetooth wireless audio 
receiver is in pairing mode, the DOCK indicator 
flashes in the front panel display.

y

To cancel pairing, press RETURN.

Check that the Bluetooth component 
detects the Yamaha Bluetooth wireless 
audio receiver.
If the Bluetooth component detects the Yamaha 
Bluetooth wireless audio receiver, the audio 
receiver name (“YBA-10 YAMAHA” for 
example) appears in the device list of the 
Bluetooth component.

■ Establishing a connection

After the pairing is completed, perform the connecting 
operation on the system or on the Bluetooth 
component to enable communication between them. 
The connecting operation on the system is only 
available for the most recently connected Bluetooth 
component.

DOCK to set the input to DOCK.

OPTION to enter OPTION menu.

“CONNECT” appears firstly in the front panel 
display.

“Searching...” appears firstly in the front panel 
display.
When the system finds the last connected 
Bluetooth component, “BT connected” appears in 
the front panel display for 3 seconds.

y

• If the system cannot find the last connected Bluetooth 

component, “Not found” appears in the front panel 
display.

• If you want to establish a connection with a Bluetooth 

component other than the one most recently 
connected to, connect from that Bluetooth 
component. Refer to the instruction manual of your 
Bluetooth component for details.

To disconnect the Bluetooth wireless audio receiver from 
the Bluetooth component, display OPTION menu again, 
select “Disconnected,” and press 

(Center).

About “Pairing”
Pairing must be performed before using a Bluetooth 
component with the Yamaha Bluetooth wireless 
audio receiver connected to the system for the first 
time or if the registered pairing data has been 
deleted. “Pairing” refers to the operation of 
registering a Bluetooth component for Bluetooth 
communications.

y

To ensure security, a time limit of 8 minutes is set for the 
pairing operation. Please read and fully understand all the 
instructions before starting.