Sony DCR-HC32E Manual Do Utilizador

DCR-HC32E/HC33E/HC39E/HC42E/HC43E 2-584-907-11(1)

To cancel, touch [REC STOP], then [END].

•  When your camcorder has shot several frames, 

it records them on the tape, after performing 
the END SEARCH function depending on the 
interval length.

•  Do not turn off the power or disconnect the 

power source while a message is displayed on 
the screen.

•  The camcorder will shoot several frames for 

the first and last shots of the Smooth interval 
recording.

•  Smooth interval recording is released when 

approximately 12 hours have elapsed after 
shooting has begun.

•  Sounds are not recorded.
•  The last few frames may not be recorded if the 

battery or tape has run out.

•  There may be discrepancies in the interval.
•  If you adjust the focus manually, you can 

record clear pictures even if the light changes 
([FOCUS], p. 40).

•  You can silence the beeps during recording.

You can record still images on the 
“Memory Stick Duo” at a selected interval. 
This function is useful to observe the 
movement of clouds or the changes in 
daylight, etc.

[a]: Recording

[b]: Interval



  Touch 

 



 a desired interval time (1, 5 

or 10 minutes) 



 

 



 [ON] 



 

 



 

.



  Press PHOTO fully.

 

 stops flashing and the interval still 

image recording starts.

To cancel [INT.REC-STL], select [OFF] 
in step 



.

The default setting is [ON], allowing you 
to view the demonstration in about 10 
minutes, after you have removed both a 
cassette and a “Memory Stick Duo” from 
your camcorder, and slide the POWER 
switch down to turn on the CAMERA-
TAPE lamp.

•  The demonstration will be suspended in 

situations such as those described below.
–  When you touch the screen during the 

demonstration. (The demonstration starts 
again in about 10 minutes.)

–  When a cassette or a “Memory Stick Duo” is 

inserted.

–  When the POWER switch is set to other than 

CAMERA-TAPE.

–  When NIGHTSHOT PLUS switch is set to 

ON.

See page 65.