Sony 3-280-847-11(1) Manual Do Utilizador
12
1
Attach the wind screen B to the
supplied microphone A.
supplied microphone A.
2
Place the microphone A in the
microphone holder C with the
model name facing upward, close
the cover, and shut the clamp.
microphone holder C with the
model name facing upward, close
the cover, and shut the clamp.
3
Connect the plug of the
microphone to the INPUT1 jack
D.
microphone to the INPUT1 jack
D.
4
Put the microphone cable into the
cable holder E.
cable holder E.
5
Select the channel with the REC
CH SELECT switch F.
CH SELECT switch F.
The channel to be used differs
depending on the relationship between
the REC CH SELECT switch positions
and the input jacks.
See the table below.
depending on the relationship between
the REC CH SELECT switch positions
and the input jacks.
See the table below.
z
Tips
• See page 41 for adjusting the volume.
• Set the INPUT1/INPUT2 switch to MIC+48V
• Set the INPUT1/INPUT2 switch to MIC+48V
when you use the supplied microphone.
Align the marks on the lens hood to
those on the camcorder, and turn the
lens hood in the direction of the
arrow
those on the camcorder, and turn the
lens hood in the direction of the
arrow
2
.
To remove the Lens hood with lens
cover
cover
Turn the lens hood in the opposite direction
to the arrow 2 in the illustration while
to the arrow 2 in the illustration while
Attaching the supplied
microphone
microphone
LINE
INPUT2 INPUT1
MIC
MIC
LINE
MIC
MIC
INPUT2
INPUT1
REC CH SELECT
switch position
switch position
Input jack
Channel to
be used
be used
CH1, CH2
INPUT1
Channel1
Channel2
Channel2
INPUT2
-
CH1
INPUT1
Channel1
INPUT2
Channel2
Attaching the lens hood with lens
cover
cover
PUSH (lens hood release) button
Step 2: Attaching the supplied items (Continued)