Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Sony
  4. 3-280-847-11(1)
  5. Manual Do Utilizador

Sony 3-280-847-11(1) Manual Do Utilizador

Download
Página de 143
16
DVCAM (DV) format pictures
* When the LCD backlight turns on.
On the battery pack
• Before changing the battery pack, slide the 
POWER switch to OFF.
• The Battery Info (p. 54) will not be correctly 
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (For Battery 
Info only).
• Sony recommends that you use an NP-F970 
battery pack when you use your camcorder with 
the Memory Recording Unit or a video light 
(optional).
On the charging/recording/playback time
• Times measured with the camcorder at 25 °C 
(77 °F) (10 to 30 °C (50 °F to 86 °F)) is 
recommended).
• The recording and playback time will be shorter 
when you use your camcorder in low 
temperatures.
• The recording and playback time will be shorter 
depending on the conditions under which you 
use your camcorder.
You can use the AC Adaptor/Charger to 
obtain AC power.
1
Connect the power cord to the AC 
Adaptor/Charger.
2
Connect the power cord to the wall 
outlet.
3
Connect the connecting cable (DK-415) 
to the AC Adaptor/Charger.
4
Set the mode change switch of the AC 
Adaptor/Charger to VCR/CAMERA.
5
Press the connecting part of the 
connecting cable (DK-415) against the 
back of your camcorder in the battery 
slot and slide it down.
On the AC Adaptor/Charger
• Use the nearby wall outlet when using the AC 
Adaptor/Charger. Disconnect the AC Adaptor/
Charger from the wall outlet immediately if any 
malfunction occurs while using your camcorder.
• Do not use the AC Adaptor/Charger placed in a 
narrow space, such as between a wall and 
furniture.
• Do not short-circuit the DC plug of the AC 
Adaptor/Charger or battery terminal with any 
metallic objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power 
(house current) is still supplied to it while 
connected to the wall outlet via the AC Adaptor/
Charger.
Battery pack
LCD panel 
opened*
LCD panel 
closed
NP-F570 
(supplied)
180
190
NP-F770
375
390
NP-F970
570
595
Using an outside power source
1
2
4
3
5
AC Adaptor/
Charger
Power 
cord
To the wall 
outlet
Mode 
change 
switch
Connecting cord
DK-415