Sanyo VPC-HD2EX Manual Do Utilizador

English

Specify the start point of the extract.
h Use the procedure below to specify the frame from which the video 

clip extract will start.

h Play the video clip until approximately the desired point, pause the 

video clip, then play the video clip one frame at a time, stopping at the 
start point of the extract. This will be the first frame of the extract.

h If the start point of the video clip is also the start point of the extract, 

proceed to step 6.

Play:
After pausing playback, press and hold the SET button to the right for 
about 2 seconds for forward playback, or to the left for reverse 
playback.
Pause:
During playback, press the SET button.
Accelerated playback:
During playback, toggle the SET button to the left or right to change 
the playback speed.
Single frame:
After pausing playback, toggle the SET button to the right to move 
forward one frame, or to the left to move back one frame.

Toggle the SET button up.
h The start point of the video clip 

extract is set, and the screen to 
specify the end point appears.

h Specify the end point of the extract 

by following the same procedure as 
in step 5.

<When joining the first and latter 
portions>
1 Toggle the SET button down.

h Each time the SET button is 

toggled down, the sections to 
delete and the sections to save 
are reversed.

2 Specify the end point of the 

extract. The frame following the 
end point of the extract will be the 
start point of the latter portion to be 
joined.

00:01:10

End point

Portion to be deleted

Approximate playback time