Sony 510P Manual Do Utilizador
C
h
apt
er 2
L
oc
at
at
ions
and
F
un
c
c
tion
s
s
of
P
ar
ts
ts
and
Con
tr
ols
22
2-3 Audio Functions
f MONITOR volume control
This control adjusts the speaker or earphone volume for
sounds other than the alarm sound. At the minimum
position, no sound can be heard.
This control adjusts the speaker or earphone volume for
sounds other than the alarm sound. At the minimum
position, no sound can be heard.
g ALARM volume control
This control adjusts the speaker or earphone alarm volume.
At the minimum position, no sound can be heard.
However, if in the AUDIO-1 page of the
MAINTENANCE menu the MIN ALARM VOL item is
set to “SET”, the alarm tone is audible even when this
volume control is at the minimum position.
This control adjusts the speaker or earphone alarm volume.
At the minimum position, no sound can be heard.
However, if in the AUDIO-1 page of the
MAINTENANCE menu the MIN ALARM VOL item is
set to “SET”, the alarm tone is audible even when this
volume control is at the minimum position.
ALARM volume control
h Built-in speaker
The speaker can be used to monitor E-E sound during
recording, and playback sound during playback. The
speaker also sounds alarms to reinforce visual warnings.
The output level of the speaker can be lowered by
changing the setting of the SP ATT LEVEL item on the
AUDIO-1 page of the MAINTENANCE menu.
If you connect an earphone to the EARPHONE jack, the
speaker is automatically muted.
The speaker can be used to monitor E-E sound during
recording, and playback sound during playback. The
speaker also sounds alarms to reinforce visual warnings.
The output level of the speaker can be lowered by
changing the setting of the SP ATT LEVEL item on the
AUDIO-1 page of the MAINTENANCE menu.
If you connect an earphone to the EARPHONE jack, the
speaker is automatically muted.
See 10-3 “Operation Warnings” on page 168 for
information about alarms.
information about alarms.
Audio functions (2)
i LEVEL (CH-1/CH-2) (audio channel-1 and
channel-2 recording level) controls
These controls adjust the audio levels of channels 1 and 2
when the AUDIO SELECT switches are set to MANUAL.
when the AUDIO SELECT switches are set to MANUAL.
CH-1/2 CH-3/4
switch
position
switch
position
MONITOR
switch
position
switch
position
Audio output
CH-1/2
CH-1
Audio channel 1
MIX
Mix sound of channels 1 and 2
CH-2
Audio channel 2
CH-3/4
CH-3
Audio channel 3
MIX
Mix sound of channels 3 and 4
CH-4
Audio channel 4
Minimum
Maximum
PRESET
SEL/SET
THUMBNAIL
S.SEL
ESSENCE MARK
SHIFT
CLIP MENU
SUB CLIP
REGEN
CLOCK
CLOCK
F-RUN
SET
R-RUN
9
LEVEL (CH-1/CH-2) controls
qa
AUDIO IN CH-1/CH-2 / CH-3/CH-4 switches
0
AUDIO SELECT CH-1/CH-2 switches
qs
LINE / AES/EBU / MIC selectors
qf
AUDIO OUT connector
qg
AUDIO IN CH1/CH2 connectors
qh
DC OUT 12V connector
qd
+48V/OFF switches