Sanyo 9.1 Manual Do Utilizador

English

1 Set the camera to the card reader mode (page 8).

h If a message appears on the computer monitor instructing you to load 

the Windows CD-ROM, follow the instructions and install the driver.

h The camera is recognized as a drive, and [XACTI (E:)] (or [XACTI_INT 

(E:)] in case of the camera’s internal memory) appears in the [My 
Computer] window.
* The drive name (E:) may be different on your computer.

h The card is recognized (mounted) as a disk.
h Double-click on the [XACTI (E:)] (or [XACTI_INT (E:)] in case of the 

camera’s internal memory) icon in [My Computer], and you can 
process the contents of the card installed in your camera exactly like 
you would the data in the other computer drives.

i To disconnect your camera, be sure to follow the procedure below. Failure 

to follow this procedure may cause faulty operation of your computer or 
loss of card data.

1 Left-click on [Unplug or Eject Hardware] in the task tray.

h A list appears showing the devices connected to the computer’s USB 

connector.

2 Left-click on the camera drive (E:).

* The drive name (E:) may be different on your computer.

h The [Safe to Remove Hardware] dialog box will open. 

3 Click on the [OK] button. 

h You can now disconnect the camera.