Samsung VP-HMX10N Manual Do Utilizador

44_ English

Connecting to a normal TV (16:9/4:3)

•  The connection is used when downconverting recorded HD images to SD for playback.

•  When playing back HD-quality (1280x720) movie images on a SDTV, the images are down-converted to 720x576.

•  The multi-AV cable does not support HD-quality images so it down-converts them to SD-quality images.

•  Before connecting your HD camcorder to a TV, set the same aspect ratio on your HD camcorder as on your TV. 

page 70

•  Method 1: Tune the output signal for TV using the “Component Out” function. page 71

•  Method 2: When connecting with Multi -AV cable.

•  If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).

•  You may use an S-Video jack on the cable to obtain better quality images if you have an S-Video jack on 

your TV.

•  Even if you use an S-Video jack, you need to connect an audio cable.

•  When connecting HDMI, component and multi-AV cables at the same time, the video output priorities are as 

follows: HDMI output  Component output  S-Video output  Video output

•  When connecting your HD camcorder to TV through HDMI, component, or multi-AV cable, check whether 

the connections are correctly made.

•  When inserting/removing the HDMI, component, and multi-AV cables, do not apply excessive force.

•  When connecting the multi-AV cable or component cable, make sure to match the color of the cable plugs 

to the TV jacks.

•  It is recommended to use the AC power adaptor as the power source.

•  When the HD camcorder is connected to a TV, you cannot control the volume of the TV from the camcorder.

connection

Method 1

Normal TV

HD camcorder

Signal flow

Component cable

Method 2

Normal TV

HD camcorder

Signal flow

Multi-AV cable

or