Samsung SMX-C20RN Manual Do Utilizador

This right side of the bar shows the digital zooming zone. 
The zooming zone appears when you move the zoom lever.

When "Wind Cut" is "On", some low frequency sound is eliminated along with the sound of the wind.

You can reduce wind noise when recording sound with the built-in microphone. If "Wind Cut : On" is set, 
the low-frequency components in the sound picked up by the microphone will be cut off during recording. 
This makes it easier to hear voices and sound during playback. Use Wind Cut when recording in windy places 
such as a beach.

Off: Disables the function.
On (       ):  Minimizes wind noise or other noise while recording.

•
•

1. Press 

the 

MENU button 

 Control button ( / )  

2.  Select the desired submenu item with the Control button 

(

 / )  OK button.

3. Press 

the 

MENU button to exit the menu.

You can select the maximum zoom level if you want to zoom to a level greater than 10x (the default setting) 
during recording. Zoom up to 10x is achieved optically, and after that, zoom up to 1200X is achieved digitally. 
Note that the image quality decreases when you use the digital zoom.

Off: Only optical zoom is available up to 10x.
On:  Digital zoom is available up to 1200x. Moving the zoom 

lever displays the digital zoom bar.

•
•

1. Press 

the 

MENU button 

 Control button ( / )  

2.  Select the desired submenu item with the Control button (

 / ) 

 OK button.

3. Press 

the 

MENU button to exit the menu.

The image quality may deteriorate depending on how much you zoom in on the subject.
Maximum zooming may result in lower image quality.

•
•

Wind Cut

Off

On

Exit

Digital Zoom

Off

On

Exit