Samsung HMX-E10ON Manual Do Utilizador

We recommend that you power off before 
inserting or removing the memory card to 
avoid data loss.
You have to format newly-purchased 
memory cards, memory cards with data 
that your camcorder cannot recognize or 
with data saved by other devices. Note 
that formatting erases all data on the 
memory card and deleted data cannot be 
recovered.
A memory card has a certain life span. 
If you cannot record new data, you have to 
purchase a new memory card.
Do not bend, drop, or subject the card to 
strong impacts.
Do not place foreign substances on the 
memory card terminals. Use a soft dry 
cloth to clean the terminals if required.
Do not paste anything other than label 
provided with the card on the label pasting 
section.
Be careful to keep the memory card out of 
the reach of children, who might swallow it.
Make sure to format the memory card 
on this camcorder. If the memory card 
had been formatted by a PC or other 
device, using it on this camcorder 
without formatting may fi nd trouble with 
recording and/or playback. Samsung is 
not responsible for damage of recorded 
contents caused by such reasons.

The data storage speed may differ, 
depending on the manufacturer and 
production system.

SLC (Single Level Cell) system: faster 
write speed enabled.
MLC (Multi Level Cell) system: only 
lower write speed is supported.

For best results, we recommend using 
a memory card that supports a faster 
write speed. Using a lower write speed 
memory card for recording video may 
cause diffi culties when storing. You may 
even lose your video data during the 
recording.
In an attempt to preserve every bit of the 
recorded video, the camcorder forcibly 
stores the video on the memory card and 
displays a warning: 
“Low speed card. Please record at a 
lower resolution.”
If you are unavoidably using a low speed 
memory card, the resolution of the 
recording may be lower than the value
you set. 

¬page 44

The higher the resolution and quality, the 
more memory the camcorder uses.

Samsung is not responsible for data loss due to misuse.
We recommend using a memory card case to avoid data loss caused by motion or static electricity.
After a period of use, the memory card may get warm. This is normal and is not a malfunction.

This camcorder uses micro SD/micro SDHC memory cards. 
To use a micro SD/micro SDHC directly with a computer or a card reader 
you must attach it to or insert it into an adaptor.