Samsung SMX-K45SN Manual Do Utilizador

Página de 142
ZOOMING IN AND OUT
Use the zoom function for close-up or wide-angle recording. This camcorder 
allows you to record using 52x optical power zoom, 65x Intelli-zoom and 2200x 
digital zoom.
To zoom in
Slide the Zoom lever towards 
T (telephoto).
(Or  press the 
Control button () on the LCD panel.)
To zoom out 
Slide the Zoom lever towards 
W (wide-angle).
(Or  press the 
Control button () on the LCD panel.)
You can zoom with the zoom lever or the 
Control (W/T) button on the LCD panel.
Zoom magnifi cation over 65x is done through digital image processing, and is 
therefore called digital zoom. Digital zooming is possible up to 2200x. 
Set 
"Zoom Type" to "Digital Zoom." ➥page 65
The minimum possible distance between the camcorder and subject while 
maintaining sharp focus is about 1cm (about 0.39 inch) for wide-angle and 
1m (about 39.4 inches) for telephoto.
Optical zoom preserves image quality, but during digital zoom the image 
quality may suffer. 
Fast zooming or zooming in subject at a far distance may produce slow 
focusing. If this occurs, use 
"Manual Focus." ➥page 62 
It is recommended to use
 Anti-Shake (OIS) with handheld recording if the 
subject is zoomed in and enlarged.
Frequent use of the zoom function consumes more power.
Zooming during a recording may record operation sound of the zoom lever 
or zoom button.
When using the zoom function, its speed can be decreased by slowly moving 
the Zoom (W/T) lever. A fast moving increases the zoom speed. However, the 
Zoom (W/T) button on the display cannot adjust the zoom speed. 


English
_45
W: Wide-angle
T: Telephoto
0:00:00 [475Min]
STBY
9999
~
{
vu
vmm
tvkl
OK
W: Recording wide area
    (wide-angle)
 
 T: Recording enlarged 
    image (telephoto)