ICP DAS USA IM-30 Manual Do Utilizador

Página de 109
 
8 Appendix 
8.1 Standards 
Compliance 
 
Report No. : FV6N2310
For customers in the U.S.A. 
This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense. You are cautioned that any changes or modifications not 
expressly approved in this manual could void your authority to operate this equipment. The 
shielded interface cable recommended in this manual must be used with this equipment in 
order to comply with the limits for a computing device pursuant to Subpart J of Part 15 of FCC 
Rules. 
For customers in Canada 
This apparatus complies with the Class A limits for radio noise emissions set out in the Radio 
Interference Regulations. 
Pour utilisateurs au Canada 
Cet appareil est conforme aux normes classe A pour bruits radioélectriques, spécifiées dans 
le Règlement sur le brouillage radioélectrique. 
Life support applications 
These products are not designed for use in life support appliances, devices, or systems where 
malfunction of these products can reasonably be expected to result in personal injury. Allied 
customers using or selling these products for use in such applications do so at their own risk 
and agree to fully indemnify Allied for any damages resulting from such improper use or sale. 
Certificated No. :EC6N2310
The equipment was passed the test performed according to: 
European Standard EN 55022:1998/A1:2000/A2:2003 Class A, EN 61000-3-2:2000, EN
61000-3-3:1995/A1:2001, EN 55024:1998/A1:2001/A2:2003(IEC 61000-4-2:1995/A2:2000, 
IEC 61000-4-3:2002, IEC 61000-4-4:1995/A2:2001, IEC 61000-4-5:1995/A1:2000, IEC 
61000-4-6:1996/A1:2000, IEC 61000-4-8:1993/A1:2000, IEC 61000-4-11:1994/A1:2000) 
 
 
- 104 -