Sony ILCE7SB Manual Do Utilizador
GB
58
Shooting a clear image without camera
shake
shake
“Camera shake” refers to unwanted movement of the camera that occurs
after the shutter button has been pressed, resulting in a blurred image.
To reduce camera shake follow the instructions below.
after the shutter button has been pressed, resulting in a blurred image.
To reduce camera shake follow the instructions below.
Notes
• The camera shake warning indicator does not appear in the following situations:
– The exposure mode is set to M/S, or during movie recording.
– When the viewing mode is set to [No Disp. Info.], [Level], or [Histogram].
– When the viewing mode is set to [No Disp. Info.], [Level], or [Histogram].
When a lens equipped with the camera shake compensation function is
used, the SteadyShot function is available for this camera to reduce camera
shake.
used, the SteadyShot function is available for this camera to reduce camera
shake.
MENU button t
(Camera Settings) 7 t [SteadyShot] t
Select the desired setting.
Notes
• The SteadyShot function may not work optimally when the power has just been
turned on, right after you point the camera towards a subject, or when the shutter
button has been pressed all the way down without stopping halfway.
button has been pressed all the way down without stopping halfway.
• When using a tripod, deactivate the SteadyShot function because there is a potential
for malfunction of the SteadyShot function.
Camera shake warning indicator
In situations where the camera may be
subject to camera-shake, the
subject to camera-shake, the
(Camera shake warning) indicator
flashes. In this case, use a tripod or the
flash.
flash.
Using the SteadyShot function
(Camera shake warning)
indicator