Panasonic BP325 Manual Do Utilizador

21

C

onnecting

1.  Select [Connection Setting] option in the 

[Setup] menu then press ENTER (b). 

2.  Read the preparations for the network settings 

and then press ENTER (b) while [Start] is 

highlighted.

Network will automatically be connected to the 
unit.

If you want to set the network settings manually, 
use w/s to select [Advanced Setting] on the 

[Network Setting] menu and press ENTER (b).
1. Use w/s/a/d to select the IP mode 

between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP 
address automatically.

If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using  
w/s/a/d and numerical buttons. If you 

make a mistake while entering a number, press 
CLEAR to clear the highlighted part.

 

,

Note

2.  Select [Next] and press ENTER (b) to apply 

network settings.

Network connection status is displayed on the 
screen.

3.  Press ENTER (b) while [Close] is highlighted to 

finish the wired network settings.