Yamaha WR45OFR Manual Do Utilizador
3 - 57
INSP
ADJ
REPLACING THE HEADLIGHT BULBS
3. Replace:
●
Blown fuse
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
4. Install:
●
Fuse cover
●
Seat
Replacement steps:
●
Set the main switch to “OFF”.
●
Install a new fuse of the correct amperage.
●
Set on the switches to verify if the electri-
cal circuit is operational.
cal circuit is operational.
●
If the fuse immediately blows again, check
the electrical circuit.
the electrical circuit.
Items
Amperage
rating
Q’ty
Main fuse
10 A
1
REPLACING THE HEADLIGHT BULBS
1. Remove:
●
Headlight
Refer to “SEAT, FUEL TANK AND
SIDE COVERS” section in the CHAP-
TER 4.
Refer to “SEAT, FUEL TANK AND
SIDE COVERS” section in the CHAP-
TER 4.
2. Remove:
●
Headlight bulb holder cover 1
3. Detach:
●
Headlight bulb holder 1
4. Remove:
●
Headlight bulb 2
WARNING
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb unit it has cooled
down.
hot, keep flammable products and your
hands away from the bulb unit it has cooled
down.