Ikelite MD255 Folheto

BBAATTTTEERRYY AAN

D TTAAPPEE

_________________________________________________________

• Install a fully charged Canon battery on the camera:

Canon NB-2LH, BP-2L13

• Other brand batteries may not fit inside the housing.
• Make sure you have loaded an appropriate digital cassette tape in the camera.

FFIIN

NAALL PPRREEPPAARRAATTIIO

________________________________________________________

The program selector on the camera M

USSTT be in the 11PP22 position for the focus lock

button to function.

The cameras auto focus feature is utilized underwater. For best results, move

in close to your subject and use the wide angle range to shoot thru as little water as

possible. The full zoom range is accessible underwater. Chart shows recommended

initial settings underwater.

HIITTEE BBAALLAAN

NCCEE

____________________________________________________________

Initially set the white balance to Auto. Use the touch screen controls on the

housing to change white balance.
CCoolloorr FFiilltteerr:: When using the color filter during the day, set camera white balance

to Indoor for 0-15 foot depth. For 15-80 foot depth, set white balance to Outdoor.
VViiddeeoo--LLiittee:: When using optional Video Lite at NIGHT, set the camera white balance

to the Indoor position. During the DAY, use the Outdoor setting for subjects beyond

4-5 feet and the Indoor setting for closer subjects.

CCAAM

MEERRAA

SSEETTTTIIN

NGG

Power On/Off

P Camera On

Zoom Lever

P Wide Angle Setting

Focus

P Auto Mode

Exposure

P Auto Mode

Lens Cover Switch

P Open

I N

N SS TT AA LL LL AA TT II O

O N

CCAAM

MEERRAA TTRRAAYY

_________________

The camera mounts to the tray,

which extends from the back plate of the

housing. D

O N

OTT remove the tray from

the back plate.

Position the camera against the two

stabilizing pins on the tray and secure

camera with the tripod mounting bolt.

The camera should fit easily on the tray

and should be parallel with the sides

of the tray.

IIN

NSSEERRTTIIN

NGG TTH

HEE CCAAM

MEERRAA

___________

Check that the oQring is clean and

properly positioned on the lip of the clear housing back plate.

Once the camera is mounted to the tray as shown above, pull the housing

controls out to provide clearance for installing the camera. Slowly slide the camera

tray with camera mounted back into the housing. As the camera slides into the

housing, make sure the camera lens fits into the port recess in the front of the

housing.

O N

OTT force this installation; the camera and tray should slide easily into

place so the housings back plate oQring is resting against the main housing body.

In this position the lid snaps can be positioned over the lid hooks on the housing

back plate and snapped into position to seal the housing.

USSIIN

NGG CCO

NTTRRO

OLLSS

________________________________________________________

Slide the housing controls back in place making sure they properly align with the

camera functions.

Operate each control to see how it works with the camera. Some controls such as

start/stop will be used frequently. Other controls may seldom be utilized. Refer to

your camera owners manual for the proper function of each camera control. Look

thru the back to be sure that you can see into the viewfinder.

When using the housing controls, especially the start/stop, do NOT use excessive

force because you could damage the camera.

CCAAU

UTTIIO

Remove the lens cap and cord from the camera.

Otherwise, the cord may interfere with the housing seal.

If the housing controls are not properly positioned,

they could interfere with the housing seal.

IIKKEELLIITTEE U

DEERRW

WAATTEERR SSYYSSTTEEM

MSS

50 West 33rd Street • PO Box 88100 • Indianapolis, IN 46208 USA

317.923.4523

Email: ikelite@ikelite.com

•

www.ikelite.com

6047-01-0708

Camera Mounting Bolt

Camera Tray

O’ring

SuperEye

Back Plate

Stabilizing

Pins