Nortel Networks P0857846 Manual Do Utilizador

56 / Time savers for making calls

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

P0857846 Issue 02

If you select a line before pressing the autodial button, the call will 
go out on the line you have selected instead of the line that is part of 
the autodialer programming.

For the M7100 telephone, an external autodialer can only be 
programmed using a line and not a line pool.

If you press 

∆

 as the line for an external autodial number, 

you must include a valid line pool access code or a destination code. 
If line pool access codes or destination codes are changed, 
remember to reprogram autodial numbers as well.

If you do not include a line selection in an 

autodial number, the call will use your prime line (if 
you have one).

Continue to enter digits until the number is 
complete. Press 

√

 

or 

BKSP

 to 

erase an incorrect digit. Press

 

˙

 or 

OK

 when you are finished.

The memory allotted to autodial numbers in 
your Norstar system is full.

While programming external Autodial, you 
erased the button by pressing 

˙

 or 

OK

 

before entering any digits.

Enter the number you wish to program 
(choosing the line first if necessary) exactly 
as you would if you were making a call.

Enter the internal telephone number you 
wish to program.

You are programming an internal autodial 
button and have entered a number that is not 
an internal number on your system. Enter a 
valid internal number. If the number you are 
entering is a destination code, use external 
autodial.