Lucent Technologies 555-670-111 Manual Do Utilizador
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
Programming Special Characters
H-2
Analog Multiline Telephones
H
Analog Multiline Telephones
4
Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H-2.
Special Characters for Analog Multiline Telephones
Press...
See
1
...
1
Display telephones only.
Means...
Drop
2
s
Stop. Inserts a Stop within a sequence of
automatically dialed numbers. For example, an
outside Auto Dial button may be programmed with a
password, then a Stop, then a telephone number. To
use Auto Dial with a Stop in the sequence, the user
presses the button to dial the password, listens for
the dialing and connection, and presses the button
again to dial the number.
automatically dialed numbers. For example, an
outside Auto Dial button may be programmed with a
password, then a Stop, then a telephone number. To
use Auto Dial with a Stop in the sequence, the user
presses the button to dial the password, listens for
the dialing and connection, and presses the button
again to dial the number.
Hold
p
Pause. Inserts a 1.5-second pause in the dialing
sequence. Multiple consecutive pauses are allowed.
sequence. Multiple consecutive pauses are allowed.
Conference
2
2
Not available on MLC-5, MDC 9000, and MDW 9000 cordless and cordless/wireless telephones.
f
Flash. Sends a switchhook flash. Must be the first
entry in the dialing sequence.
entry in the dialing sequence.
##
#
End of Dialing for Auto Dial buttons. Used at the
end of a dialing sequence to indicate that the user
has finished dialing or to separate one group of
dialed digits from another.
end of a dialing sequence to indicate that the user
has finished dialing or to separate one group of
dialed digits from another.
#
#
End of Dialing. Used at the end of a dialing
sequence to indicate that the user has finished
dialing or to separate one group of dialed digits from
another.
sequence to indicate that the user has finished
dialing or to separate one group of dialed digits from
another.