Lucent Technologies 555-670-111 Manual Do Utilizador
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
Programming Basics
1-54
Idle States
1
Exiting System Programming
1
to return to the System Programming menu, the
main menu (Menu Mode screen), or the Home screen from within a programming
screen.
screen.
Idle States
1
Some programming procedures can be started only when the entire system, or
some part of it, such as a trunk or an extension, is idle (not in use). Some
procedures require that a trunk or extension be idle only at the instant of
programming. Lengthy procedures require the system, trunk, or extension to
remain idle until programming is completed. These procedures wait for the
system, trunk, or extension to become idle and then prevent the initiation of any
new calls. This condition is called forced idle.
some part of it, such as a trunk or an extension, is idle (not in use). Some
procedures require that a trunk or extension be idle only at the instant of
programming. Lengthy procedures require the system, trunk, or extension to
remain idle until programming is completed. These procedures wait for the
system, trunk, or extension to become idle and then prevent the initiation of any
new calls. This condition is called forced idle.
NOTE:
If a procedure requires an idle condition, do the programming outside of
normal business hours.
normal business hours.
If a procedure requires that the system be idle and the system is busy when you
begin, you see the screen shown in
begin, you see the screen shown in
.
Table 1-6.
Exiting System Programming
To return to…
On the console, press…
On the PC, press…
Previous Menu
Exit
Main Menu
Menu
Normal Call-
Handling
Handling
Home