Sharp AR-C260M Manual Do Utilizador

This screen is displayed when the [JOB STATUS] key on the operation panel is pressed.
A job list showing the current job at the top of the job queue or a list showing completed jobs can be displayed.
The contents of jobs can be viewed or jobs can be deleted from the queue.

This shows the current job and the jobs waiting to
be run. The icons to the left of the jobs in the queue
show the job mode.

The displayed jobs in the job list are themselves
operation keys. To cancel printing or to give a job
the highest print priority, touch the relevant job key
to select the job and execute the desired operation
using the keys described in 5 and 6.

When a job status display indicates "PAPER
EMPTY", the specified paper size for the job is not
loaded in any of the trays. 
In this case, the job will be suspended until the
required paper is loaded. Other stored jobs will be
printed (if possible) until the required paper is
loaded. (Other jobs will not be printed if the paper
runs out during printing.) If you need to change the
paper size because the specified paper size is not
available, touch the current job key to select it and
then touch the [DETAIL] key described in 6.

Use to display the print job list for print and copy
mode.

This displays a list of only the jobs that use the
network scanner function. (Only when the network
scanner function is added.)

Use to switch the page of the displayed job list.

Use to cancel or delete the current job or delete the
selected reserved job.

The key is only effective for computer print jobs and
only appears in the job status screen of the print
mode. It is used to display detailed information of a
selected print job and to change the paper size for
the print job.

JOB QUEUE

COPY

SHARP001

STATUS

PAPER EMPTY

003 / 000

PRINT JOB

SCANNER JOB

JOB QUEUE

DETAIL

STOP/DELETE

003 / 000

1/1

SETS / PROGRESS

WAITING

*

Copy mode

Print mode

Network scan mode

sec_whale_01_1.fm  10 ページ  ２００２年１１月１３日　水曜日　午後１０時３分