Hitachi DZ-GX5020A Manual Do Utilizador

English

If you open the LCD monitor, you can monitor 
subject image on the LCD screen.

Open the LCD monitor.

The LCD monitor has a portion where you 
can hook your finger. Hook the finger there to 
open the monitor.

●Range where the LCD monitor can 

The LCD monitor can be opened up to 
approximately 90º.
If the LCD monitor is open 90º, it can be tilted 
with the screen down as much as 90º, and can 
also be tilted with screen up and turned up to 
180° so the screen faces in the same direction as 
the lens.

If the LCD monitor is turned 180º so the screen 
faces in the same direction as the lens during 
recording, subject image will also appear in the 
viewfinder as a mirror image (left/right 
reversed).
Tilt the LCD monitor to adjust its vertical angle 
so that you can see the screen easily.

• If no image appears on LCD monitor screen, refer to 

“Troubleshooting” on page 135.

• If LCD monitor lights white, refer to page 57.
• Be sure to open the LCD monitor approximately 90º 

before changing its vertical angle.

• Do not record for a prolonged time with the LCD 

monitor turned approximately 180º in close contact 
with the DVD video camera/recorder body: Doing this 
could cause the DVD video camera/recorder and LCD 
monitor to become hot.

Pull out the viewfinder.

Turn the diopter control knob to adjust the 
focus to suit your eyesight.

• If no image appears in viewfinder, refer to 

“Troubleshooting” on page 135.

• If the LCD monitor is opened approximately 90º, the 

viewfinder will be off: Turn the open LCD monitor 180º 
so that it faces the same direction as the lens; the 
image will appear in the viewfinder.

• Focusing will not be correct unless the viewfinder is 

pulled out.

• See “LCD/EVF Setup” (on page 35) if you wish to 

display images in the viewfinder regardless of 
whether you open or close the LCD monitor.

Hook your finger

90º

(Bottom)

180º

Diopter control

Pull out the viewfinder 
until a click is heard.

Viewfinder