iON Ion Manual Do Utilizador

Working with Multiple Cue Lists

207

[Go To Cue] defaults to the currently selected cue list. [Go to Cue] is a live function. It can not be 
used to change cues in blind. [Go to Cue] instructions can be executed from any operating mode, 
without returning to live.

By default, a Go to Cue instruction is an out-of-sequence cue and will follow the rules of such (see 

For examples of how to use [Go To Cue] in playback, please see 

.

[Go To Cue] [0] is a command line instruction that resets all intensity values not owned by another 
fader to default, including any manual values that are not an override to another active fader value. 
[Go To Cue] [0] [Enter] also resets the selected cue list to the top of the list, with the first cue 
pending. 

To [Go To Cue] [0] on another cue list, press:

• [Go To Cue] [2] [/] [0] [Enter]

Captured channels, independent values and values from other faders running a different cue list 
are not affected by a [Go To Cue] [0] command.

When [Go To Cue] [0] is executed, any intensity values owned by the associated cue will fade out, 
while all non-intensity parameters remain in the current state. A [Go To Cue] [0] instruction does 
not impact the input from other programmers using partitioned control, unless the channels or 
parameters are shared.

[Go To Cue] [0] & [Load]

You can use [Go To Cue] [0] in conjunction with a fader load button to send a specific cue list to cue 
0. This action does not use the command line. On the desired fader, simply press:

• [Go To Cue] [0] & [Load] 

To reset all parameters to their default state (unless they are controlled by a submaster) and reset 
all cue lists that are loaded to faders so that the first cue of each list is pending, press: