ICOM IC-706MKIIG Manual Do Utilizador

PS-125 / PS-85

Connect to an AC outlet
using the supplied AC cable.

DC power cable

DC power
socket

CONNECTING A NON-ICOM
DC POWER SUPPLY (For Europe versions)

Transceiver

DC power 

socket

To non-Icom
power supply

[GND]

OPC-639

Transceiver

DC power
socket

To AC outlet

Supplied
DC power cable

13.8 V

Black

30 A fuses

Red

20 A

13

2

INSTALLATION AND CONNECTIONS

■ Power supply connections

Use the optional PS-125 / PS-85 

DC POWER SUPPLY

when operating the IC-706MKIIG with AC power.
Refer to the diagram below for connection.

Before connecting the DC power

cable, check the following important items. Make
sure:
• The [POWER] switch is OFF.
• Output voltage of the power source is 12–15 V

when you use a non-Icom power supply.

• DC power cable polarity is correct.

Red

:

positive (+) terminal

Black :

negative (–) terminal

Grommet

connect to

a 24 V battery.

Use terminals for

the cable connections.

Crimp

Solder

Supplied
DC power cable

red

black

12 V
battery

Note: When using the PS-125, the IC-
706MKIIG Europe version complies with
EMC directives even if the OPC-639 is
not used.