Emerson MC68HC16Z1 Manual Do Utilizador
System and Control Options
29
6.4
Setup System - Setup ZN2 Zone 2
The Liqui-tect panel has two independent zones—ZN1 and ZN2—that
may be configured individually. Each zone can monitor up to 5,000 ft.
(1524m) of leak detection cable.
To configure the second zone:
To configure the second zone:
• In the Setup System Menu, choose Setup ZN2 Zone 2 (see above
right).
• Follow the same procedures used in setting up Zone 1, as
described in the previous section, 6.3 - Setup System - Setup
NOTE
The setup options are identical for both zones, except the
The setup options are identical for both zones, except the
name of the zone differs.
Setup System Menu
SETUP ZN1 ZONE 1
> SETUP ZN2 ZONE 2
SETUP ALARM OUTPUTS
↑↓
=NEXT
↵
=SELECT
SETUP REALARM DELAY
SETUP MAPMODE
SETUP SYSTEM INFO
SETUP MAPMODE
SETUP SYSTEM INFO
Setup Zone 2 Menu
SETUP ZN2 ZONE 2
> CONNECTED: N
LABEL: ZONE 2
↑↓
=NEXT
↵
=SELECT
UNITS: FT
AUTO CALIBRATE
WATER DETECT:150 UA
CONTAMINATED:050 UA
AUTO CALIBRATE
WATER DETECT:150 UA
CONTAMINATED:050 UA