Panasonic AW-HE130K Manual Do Utilizador

Camera menus are displayed on the monitor when the unit’s settings are

to be selected.

The monitor is connected to the video signal output connector.

The basic camera menu operations involve displaying sub-menus from

the Top Menu items, and selecting settings on the sub-menus.

Some sub-menus have menu items for performing more detailed

settings.

The camera menu operations are conducted using the wireless remote

control.

If a controller is connected, they can also be conducted using the

controller.

• Check that your controller is the following version. If the version is

older, consult your local dealer.

AW-RP50: Ver 3.00.00 or later

AW-RP120: Ver 2.00.00 or later

AK-HRP200: Ver 4.00-00-0.00 or later

Described below are the basic operations for changing the camera

menu item settings using the wireless remote control and controller

(AW-RP50, AW-RP120 or AW-HRP200).

 

„

Press the <CAM1>, <CAM2>,

<CAM3>, or <CAM4> button.

Press the <CAMERA STATUS>

or <SELECTION> button.

Press the <CAMERA STATUS>

or <SELECTION> button.

1. Press and hold the <SELECT>

(camera selection) button for

about 2 seconds.

  → The camera number

in the camera number

display area blinks.

2. Press the lit <DATA

SET> buttons (<UP> and

<DOWN>).

  → Press the lit <DATA SET>

buttons (<UP> and <DOWN>)

to select the camera number.

3. Press the <SELECT>

(camera selection) button.

  → Control of the selected

camera is enabled.

Press and hold the <MENU>

button for about 2 seconds.

Press and hold the <CAMERA

OSD> button for about 2

seconds.

Press and hold the <CAMERA

OSD> button for about 2

seconds.

Press and hold the <CHARA/

MENU> button for about 2

seconds.

Press the <4>, <5>, <b>, or

<a> button.

Turn the <F1> dial.

Turn the <F1> dial.

Turn the <SELECT> dial.

Press the <M> button.

Press the <F1> dial.

Turn the <F1> dial.

Press the <SELECT> dial.

Place the cursor on [Return],

and press the <M> button.

Place the cursor on [Return],

and press the <F1> dial.

Place the cursor on [Return],

and press the <F1> dial.

Place the cursor on [Return],

and press the <SELECT> dial.

Place the cursor on the item

you want to change, <M>

button to make the setting

value blink.

Change the value using the

<4>, <5>, <b>, or <a>

button, and press the <M>

button to confirm.

1. Press the <F1> dial to make

the setting value blink.

2. Turn the <F1> dial to change

the setting value.

3. Press the <F1> dial to

confirm the setting value

(blinking stops).

1. Press the <F1> dial to make

the setting value blink.

2. Turn the <F1> dial to change

the setting value.

3. Press the <F1> dial to

confirm the setting value

(blinking stops).

1. Press the <SELECT> dial to

make the setting value blink.

2. Turn the <SELECT> dial to

change the setting value.

3. Press the <SELECT> dial

to confirm the setting value

(blinking stops).

Tap the MENU button (hold

for less than 2 seconds) while

the setting value is blinking.

―

―

―

Press and hold the <MENU>

button for about 2 seconds.

Press and hold the <CAMERA

OSD> button for about 2

seconds.

Press and hold the <CAMERA

OSD> button for about 2

seconds.

Press and hold the <CHARA/

MENU> button for about 2

seconds.

• Perform the menu operations and exit from the menus using the controller which displayed the Top Menu.

If a menu operation has been performed or a menu has been exited using another controller, first display the Top Menu and exit from it using one

controller, and then display the Top Menu and exit from it using the other controller.

• The procedures used for this unit’s menu operations may differ from the ones used for the convertible cameras and HD integrated cameras which

have already been released on the market. For details, refer to the Operating Instructions of the camera concerned.

• The response speed of the camera differs slightly depending on the controller used.

36

37