Panasonic BB-HCM580A Manual Do Utilizador

2

Before proceeding, confirm that your PC is connected to your router and can access the Internet. Also confirm that your router’s UPnP

™

 feature is enabled. (Most 

routers have UPnP

™

 turned off by default.) Refer to the operating instructions included with your router or to the Panasonic Network Camera website 

(http://panasonic.co.jp/pcc/products/en/netwkcam/) for more information.

Follow these instructions when connecting a BB-HCM580A, or when connecting a BB-HCM581A using the optional BB-HCA3A AC Adaptor. Connect the camera 
to your router and the power outlet as described below.

Connect the camera to your PoE hub using a LAN cable (Cat-5 straight cable) as described below.

Lens
Indicator

FACTORY DEFAULT RESET 
button
LAN port
DC IN jack
External I/O interface
BB-HCM580A: Video terminal
BB-HCM581A: Audio/video 
terminal
Ceiling plate A hole
Serial number and MAC address 
label

SD memory card cover
FUNCTION button/indicator

*1

See 1.1 Understanding the Camera Indicator in the Troubleshooting Guide on the CD-ROM for indicator meaning.

• BB-HCM580A only: Use only the included Panasonic AC 

adaptor (order no. PQLV202U) and AC cord (order no. 

PSJA1069Z).

• BB-HCM581A only: If using an AC adaptor, use only the 

optional Panasonic AC adaptor BB-HCA3A.

1

Connect the LAN cable to the camera and the router.

2

Connect the AC adaptor cord to the DC IN jack.

3

Connect the AC cord to the AC adaptor, then plug the AC 

cord into the power outlet.

• The lens will pan and tilt when the camera is turned on.

• Confirm that the indicator lights green after about 1 

minute. If the indicator does not light green, see 1.2 

Camera Indicator Issues in the Troubleshooting Guide 

on the CD-ROM.

• When you operate the camera, the power outlet should 

be near the camera and easily accessible.

• When the lens pans or tilts, a sound can be heard from 

the camera. This is normal.

1

Connect a LAN cable to the camera and to the PoE hub.

• Your PoE hub must be connected to the router. Refer to the operating 

instructions included with the PoE hub for connection instructions.

• The lens will pan and tilt when the camera is turned on.

2

Connect a LAN cable to a LAN port of the PoE hub and to a LAN port of the 
router.

• Confirm that the indicator lights green after about 1 minute. If the 

indicator does not light green, see 1.2 Camera Indicator Issues in the 
Troubleshooting Guide on the CD-ROM.

• When the lens pans or tilts, a sound can be heard from the camera. This 

is normal.

• Use a 4-pair UTP/STP cable.

• Do not use a relay connector or a hub between the camera and the PoE 

hub. These devices may disturb the data or electricity transmission.

• If the PoE hub has indicators, the indicator lights as shown in the table 

below.

Turns on when the data is transmitted from the camera.

Turns on when the electricity is supplied to the camera.

• If the PoE hub is turned off or power supply is temporarily cut off by the 

disconnection of the LAN cable, it may take time for the PoE hub’s 
indicators to light.

• The indicator display differs depending on manufacturers, refer to the 

manuals of the PoE hub.

• If the indicator does not turn green, see 1.2 Camera Indicator Issues in the Troubleshooting Guide on the included CD-ROM.

To the 
power 
outlet

LAN cable
(Cat-5 straight cable)

Router

PC

AC adaptor

AC cord

Modem

Internet

Green

PoE hub

PoE indicator

LINK indicator

To the power 
supply

PC

Modem

Internet

LAN cable
(Cat-5 straight cable)

Router

Green