Panasonic BL-WV10 Manual Do Utilizador

Getting Started

39

The image is out of focus. The lens is dirty.

•

Clean the lens. Refer to the operating 
instructions included with the camera for 
information.

The subject is too close.

•

The camera cannot properly focus on 
subjects less than 0.5 m away. Move the 
subject further away (at least 0.5 m from the 
camera).

The image is out of focus 
(when using a camera 
with an optical zoom 
feature).

When setting the home position, sensor position, or 
preset position, manual focus mode was selected.

•

If manual focus mode was selected when 
setting the home position, sensor position, or 
preset position, the image may be out of 
focus. Set the position again using automatic 
focus mode.

Manual focus mode is selected.

•

Press and hold the left or right navigator key 
to focus, or press and hold STOP to switch to 
automatic focus mode.

The subject is too close to the camera.

•

If the subject is too close, or depending on the 
zooming position, the image may become out 
of focus. Move the subject further away from 
the camera or adjust the zoom.

Images colors are wrong.

The white balance is set incorrectly.

•

Set the white balance in the camera’s Setup 
screen (see “Camera Setup for Local 
Cameras” on page 93 of the Operating 
Instructions).

I cannot turn color night 
view mode on/off.

This feature can be turned on/off for HCM cameras 
only by accessing the camera with a PC. For BL-C10 
and BL-C30, this feature turns on and off 
automatically.

BL-WV10_GS-en.book  Page 39  Wednesday, January 25, 2006  5:18 PM