Heath Zenith PF-4197-WH Manual Do Utilizador
D
ual
B
rite
®
Motion
Sensing Diecast
Lantern
Lantern
© 2007 HeathCo LLC
598-1167-05
Set the ON-TIME switch
on the bottom of the cover
plate to
on the bottom of the cover
plate to
TEST.
MANUAL MODE
... back on.
1 Second
OFF then...
OPERATION
* resets to Auto Mode at dawn.
TEST
TEST 1 5 10 MIN
AUTO
TEST
1 5 10 MIN
Set ON-TIME switch to
1, 5, or 10 minutes.
1, 5, or 10 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
Mode:
On-Time
Works: Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
To Dawn*
x
Accent 3, 6 Hr, to Dawn
x
Note: When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.
Before installation, record the model number
from back of fixture below. Attach receipt in
case of possible warranty issues.
from back of fixture below. Attach receipt in
case of possible warranty issues.
Items
Models
066799
PF-4192-BK
067208
PF-4192-WH
253370
PF-4197-WH
Questions or problems? Before returning
to your retailer, refer to the troubleshooting
guide in this manual or call our technical ser-
vice department at 1-800-858-8501 (English
speaking only), 7:30 am to 4:30 pm, CST,
Monday – Friday.
to your retailer, refer to the troubleshooting
guide in this manual or call our technical ser-
vice department at 1-800-858-8501 (English
speaking only), 7:30 am to 4:30 pm, CST,
Monday – Friday.
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight
hours.
Package Contents
• Lantern
• Easy to use Universal Mounting Bracket
• Easy to use Universal Mounting Bracket
(X-bar)
• Mounting Hardware
• Wire Connectors
• Wire Connectors
Requirements
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control
• If you want to use Manual Mode, the control
must be wired through a switch.
•
Some electrical codes require installa-
tion by a qualified electrician.
tion by a qualified electrician.
ON-TIME
ON-TIME
Meets the ENERGY STAR
®
guidelines when D
ual
B
rite
®
function is off.