SVAT Electronics CLEARVU7 Manual Do Utilizador
SVAT ELECTRONICS
now you can see
CLEARVU7
4
1. Plug the 3.5mm to RCA (female) cable adapter into the
AV1/IN port on the monitor. Plug the cable adapter into the
headphone output.
headphone output.
2. Plug the camera’s RCA output plug into the video input
(yellow) end of the 3.5mm to RCA (female) cable adapter.
3. Repeat steps 1 and 2 for connecting a second camera to the
AV2/IN port on the monitor.
OPTION 1: CONNECTING TO SECURITY CAMERAS
8. Secure the mounting plate to the
monitor by turning the mounting
plate knob clockwise.
4. While continuing to hold these pieces
securely, insert side for bolt
(including bolt) into the center and
other side piece as shown above.
other side piece as shown above.
5. While holding the adjustment
head as shown, thread the wing
nut onto the bolt by turning the
wing nut clockwise.
6. If you need to adjust the
mounting plate or adjustment
head, loosen the wing nut
slightly, adjust, and retighten.
7. If needed, loosen the mounting
plate knob by turning it counter-
clockwise. Slide the mounting
plate into the monitor’s mounting
rail as shown.