SVAT Electronics CV301-8CH Manual Do Utilizador

CV301-8CH

now you can see

MD area stands for Motion Detection area. This setting allows you to adjust particular areas of each camera where 

motion will and will not be detected. This is good if you had a camera pointed towards something that is always 

moving, such as a busy road. This way the DVR only records motion that is out of the ordinary, thus saving you HDD 

space and more days of recording. 

To adjust the MD area 
1.  Select the setup option under to the camera you would like to adjust the motion detection area and a separate 

screen will appear with a red mask on the picture and a grid.

2.  The screen is fully red; this is because the DVR is automatically set to detect motion throughout the whole screen. 
3.  To adjust the motion detection area for the desired cameras, highlight the squares where you do NOT want 

motion detected and press select. When the area is no longer shaded in red, the area will no longer   

 

detect motion. 

4.  Once the motion detection areas have been determined, exit the screen by right clicking or pressing “ESC” then 

select “apply”, to save settings.