Sanyo VCC-4324 Manual Do Utilizador
SETTINGS
Electronic iris function setting
Use a manual or fixed iris lens and set the lens aperture to the
shortest F stop. Set the EI/BLC switch to the EI-ON position.
shortest F stop. Set the EI/BLC switch to the EI-ON position.
Note:
Please refer to the specifications for dynamic range of the electronic
iris.
iris.
CAUTION:
•
The electronic iris is suitable for normal indoor use. When the
EI/BLC switch is set to the EI-ON position, do not use an auto-iris
lens.
EI/BLC switch is set to the EI-ON position, do not use an auto-iris
lens.
•
If used under fluorescent light, the image may flicker. In such a
case, change to incandescent lighting or set the EI/BLC switch to
the OFF position and use an auto-iris lens.
case, change to incandescent lighting or set the EI/BLC switch to
the OFF position and use an auto-iris lens.
•
When shooting bright subjects, pay attention to the light angle in
order to avoid or minimize the smear phenomenon effect.
order to avoid or minimize the smear phenomenon effect.
When using an auto-iris lens (for indoor/outdoor
use)
use)
Set the EI/BLC switch to the OFF position.
CAUTION:
If conditions are outside the electronic iris operation range or more
than the maximum illumination, it will cause saturation of the CCD. In
that case, use a manual iris lens.
than the maximum illumination, it will cause saturation of the CCD. In
that case, use a manual iris lens.
ON
OFF
ON
BLC
EI
L53S4/US GB 1998, 10, 27
English
13