Avaya 03-300430 Manual Do Utilizador

1125

ABRT

PPP Link is not in service.

1. Verify whether PPP link is in-service (status port location or 

status link n).

2. If the PPP link is not in service, release the link (release link n or 

release port location).

3. Repeat the test.

2100

ABRT

Could not locate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 3 times.

FAIL

PPP link is down.

1. Test the port (test port location long) to verify the SCOTCH 

Synchronous Local Loop Around test (#1275) result.

2. If the test passes, wait for sessions to come up.

3. If the test fails, check the destination and other components in the 

path (e.g., DS1 trunks).

4. If the destination and other components in the path are in-service and 

the test still fails, execute busyout port location and release 
port location, and repeat the test.

5. If the test still fails, reset the circuit pack (busyout board 

location, reset board location, and release board 
location). Repeat the test.

6. If the problem persists, replace the circuit pack.

PASS

PPP link is up.

 2 of 2