Avaya 03-300430 Manual Do Utilizador

This test is destructive.
This test resets the VC-DSPPT and the DSP associated with it. As part of the reset procedure, 
the VC-DSPPT will execute a series of self-tests on the hardware. If these self-tests fail, the test 
will fail; otherwise the test will pass.
Before executing the test, the VC-DSPPT must be busied out by executing busyout port 
location. After the completion of the test, the VC-DSPPT must be released by executing 
release port location.

1000

ABRT

System resources required to run this test are not available, or the port may 
be busy with a call.

1. Retry the command at 1-minute intervals up to 5 times.

1015

ABRT

The VC-DSPPT is not busied out.

1. Busyout the VC-DSPPT by executing busyout port location, 

then retry the test.

2000

ABRT

Response to the test was not received from the VC-DSPPT within the 
allowable time period.

1. Retry the command at 1-minute intervals up to 5 times.

2. If this result occurs again, replace the circuit pack.

2012

ABRT

Internal system error

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

FAIL

The reset of the VC-DSPPT was unsuccessful.

1. Replace circuit pack.

PASS

The VC-DSPPT was successfully reset.

1. Release the VC-DSPPT by executing release port location.