Heath Zenith 52-4075 Manual Do Utilizador

598-1284-00

Models 52-4075 / 52-4076

•  Turns on lighting when motion is detected.
•  Automatically turns lighting off.
•  Photocell keeps the lighting off during daylight hours.

•  The Light Control requires 120-volts AC.
•  If you want to use Manual Mode, the control must be 

wired through a switch.

• 

•  This product is intended for use with a junction box 

marked for use in wet locations.

•  The backplate has knockouts so the sensor can be 

mounted on most junction boxes.

•  In some applications a universal adaptor plate may 

be needed. Adaptors are available at home centers 
and electrical supply stores.

Light Control

2 Wire 

Connectors

Gasket

4 Mounting 

Screws (2 sizes)

This package includes:

* resets to Auto Mode at dawn.

Note:  When first turned on wait about 1 

1

/

2

 minutes for 

the circuitry to calibrate.

ON-TIME

10 5 1 TEST

10 5 1 

ON-TIME

... back on.

1 Second OFF 

Put the ON-TIME switch in the 1, 5, 
or 10 minute position.

Put the ON-TIME switch on the bottom 
of the sensor in the TEST position.

Manual  mode  only  works  at  night 
because daylight returns the sensor 
to AUTO.

Flip the light switch off for one second 
then back on to toggle between AUTO 
and MANUAL MODE.

Manual  mode  works  only  with  the 
ON-TIME  switch  in  the  1,  5,  or  10 
position.

MANUAL MODE

AUTO

TEST

*  If you get confused while switching modes, turn the 

power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.

This  product  is  ENERGY  STAR

®

  compliant 

when used with 120 Watt bulbs.

Mode:

On-Time:

Works:

Day

Night

5 Sec

x

x

1, 5, 10 min.

x

Until Dawn*

x