Havis-Shields WGI-C12 Folheto

 

WGI-C12-INST-10-04 

 

 
TOOLS REQUIRED:  

Eye Safety Goggles 
Power Drill  

1/8” Drill Bit 
Phillips Screw Driver

 
HARDWARE SUPPLIED: 

22 

#10 x ½” Phillips Sheet Metal Screw 

GSM33194 

1 Driver 

Side 

Window Guard 

WGI-C12-1 

1 

Passenger Side Window Guard 

WGI-C12-6 

 
INSTALLATION: 
 

1.  First determine the correct window guard for each window.  The bottom of each guard is 

numbered, signifying its’ location. 

 
2.  Open door and hold the window guard up to the window door frame. NOTE:  The angle at the 

bottom of the guard framework faces towards the outside of the car. The guard framework fits 
evenly around the window frame. 

 

3.  Mark a few holes at the top of the door frame using the pre-drilled holes on the guard framework 

as a guide. 

4.  Remove window guard and drill holes as marked with a drill bit. 

 

5.  Attach window guard by using #10 x ½” sheet metal screws.  Now locate and mark balance of 

holes, drill and attach, starting at top and working your way down.   

 

6.  Follow the same steps for the other side of the vehicle.