Heath Zenith Motion Sensing Coach Lights Manual Do Utilizador
This package includes:
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
Requirements
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control
• If you want to use Manual Mode, the control
must be wired through a switch.
•
Some codes require installation by a
qualified electrician.
qualified electrician.
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight
hours.
© 2007 HeathCo LLC
598-1207-01
MANUAL MODE
... back on.
1 Second
OFF then...
OPERATION
TEST
TEST 1 5 10 MIN
AUTO
TEST
1 5 10 MIN
D
ual
B
rite
®
Motion
Sensing Coach Light
for Canadian Tire
for Canadian Tire
Set the ON-TIME switch on
the bottom of the cover plate
to TEST and the D
the bottom of the cover plate
to TEST and the D
ual
B
rite
®
switch OFF.
Set ON-TIME switch to
1, 5, or 10 minutes.
1, 5, or 10 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only
with the ON-TIME switch in
the 1, 5, or 10 position.
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only
with the ON-TIME switch in
the 1, 5, or 10 position.
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.
Mode:
On-Time
Works: Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
To Dawn*
x
Accent
3, 6 Hr, to Dawn
x
Meets the ENERGY STAR
®
guidelines when D
ual
B
rite
®
function is off.