Banner PBPS26U Folheto

Banner Engineering Corp.    9714 Tenth Ave. No.,   Minneapolis, MN  55441            Telephone: (612) 544-3164     FAX: (612) 544-3213

D12 Series sensors for 
use with plastic fiber optic 
assemblies include sensors 
with the letters 

FP in their 

model number suffix.

Install the plastic fiber optic assembly(s) 

as follows:
1)  Prepare the sensor ends of the fibers    

  (see page 1, bottom).
2)  Unlock (slide up) the fiber gripper and 

  insert the small fiber adaptor into the    

  ports as far as it will go.
3)  Gently insert the prepared plastic fiber  

  sensor ends into the ports as far as they  

  will go.  Slide the fiber gripper down to  

  lock.

OMNI-BEAM, MAXI-
BEAM, VALU-BEAM, 
and Q45 Series sensors for 
use with plastic fiber optic 
assemblies include sensors 
with the letters 

FP in their 

model number suffix.

Install the plastic fiber optic assembly(s) 

as follows:
  Prepare the sensor ends of the fibers    

  (see page 1, bottom).
  Loosen the clamp screw on the sensor   

  face.
  Follow steps 1-3 in the drawing, right.

Install the plastic fiber optic 

assembly(s) as follows:
  Prepare the sensor ends of the  

  fibers (see page 1, bottom).
  Loosen the clamp screw on the  

  sensor  face.
  Follow steps 1-3 in the  

 

  drawing, right.

MINI-BEAM and ECONO-
BEAM sensors for use with 
plastic fiber optic assem-
blies include sensors with 
the letters 

FP in their model 

number suffix.