Bosch 3.21.0002 Manual Do Utilizador

Security Systems

From

Telephone

Nuremberg

STVC/PRM

Product Management

+49 911 93456 0

25.06.2010

BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany

2. New Features

 Updated manual and help file in German and English

3. Restrictions; Known Issues

 VGA settings for VIP XD are not available in this Configuration Manager version. Must be set

up via the product’s web site.

 Encryption Site License (option) must be installed to make AES encryption usable.
 Under Vista when using UAC, Configuration Manager must be run as administrator for valid

licensing.

  When using the Wizard to re-configure this will not work for password-protected devices.
  FTP address must be IP address only, URL is not supported.
  When the integrated iqn-Mapper shall be used in a non-VRM environment, the iSCSI

configuration passwords must be set equal at all iSCSI targets.

 Alarm input rules of AutoDomes running firmware version 4.10 can not be configured correctly

in Configuration Manager. The Web interface shall be used instead.

 After changing the IP address of a device the settings page might not be updated

automatically. Manual refresh might be required.

 The Wizard may run into a timeout situation when configuring a camera with motion recording.

A “Retry” button appears which needs to be pressed then.

 When time zone had been changed in Advanced Mode, synchronization to PC in Basic Mode

does not update time zone.

 The “Save” button is not activated in Basic Mode when DHCP settings are changed.
 In Date/Time settings page, the date and time values shown are from PC instead of from

device.

 Upload of a configuration file might be incomplete if it includes recording settings.

It is recommended to check the settings manually.

Note:

If multiple Configuration Managers are used in the network, maintaining the same or an
overlapping set of devices simultaneously, unpredictable effects might occur when writing to
the devices.