Bosch D1260B Manual Do Utilizador
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - EXTEND CLOSING (COMMAND + 5 + 1)
46
Bosch Security Systems | 9/04 | 50410D
If you have not armed or extended closing, the
Please
Close Now
message and beep will reappear after 10
minutes. Your alarm company sets the length of time
for the closing window. To extend the window, enter
the new time at which you would like the reminder
tone to begin. This time will be the new beginning of
the closing window. The time length of the closing
window is programmed by your security company and
remains fixed.
for the closing window. To extend the window, enter
the new time at which you would like the reminder
tone to begin. This time will be the new beginning of
the closing window. The time length of the closing
window is programmed by your security company and
remains fixed.
When you hear the warning you can:
•
Press the
Silence>
soft
key will silence the beep
and clear the message for 10 minutes
•
Leave before the end of the closing window
•
Stay past the scheduled end of the closing window,
by using COMMAND 51 to extend the closing
window.
by using COMMAND 51 to extend the closing
window.
Extending the closing window does not
effect the amount of time available to close.
effect the amount of time available to close.
For example, if your closing window starts
at 4:00 p.m. and stops at 4:30 p.m. and
you extend closing to 5:00 p.m., the
closing window will now be between 5:00
and 5:30 p.m.
at 4:00 p.m. and stops at 4:30 p.m. and
you extend closing to 5:00 p.m., the
closing window will now be between 5:00
and 5:30 p.m.
1.
Ensure your keypad shows idle disarmed text.
2.
Press the
COMMAND key. The display shows
*System Command*
.
3.
Press the
5 key and then the 1 key.
If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Menu in place of steps 2 and 3 to initiate
this function.
Press the MENU> soft key to enter the
Command Menu.
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the EXTEND CLOSING
?> prompt, press its adjacent soft key.
?> prompt, press its adjacent soft key.
4.
The display changes to show the current start time.
Press the
Change>
soft key to change the start
time.
Press the
Press the
Accept>
soft key to accept the start time
and return to idle text.
5.
Enter the new time using a 12-hour (HH:MM)
format.
format.
Ex:
If the desired time is 12:34, press [1] [2] [3] [4]
Press the
AM>
soft key to select AM.
Press the
PM>
soft key to select PM.
6.
The display changes to show the new start time
briefly before returning to idle text.
briefly before returning to idle text.
7.
Press the
Accept>
soft key to accept the Close
Start time.