Roberts Gorden HE40UT Manual Do Utilizador

11 of 73

To ensure your safety, and comply with the terms of the 
warranty, all units must be installed in accordance with 
these instructions.

The gas or the electrical supply lines must not be used to 
support the heater.

Do not locate the gas or electrical supply lines directly 
over the path of the flue products from the heater.

The heater must be installed in a location that it is readily 
accessible for servicing.

The heaters must be installed with clearances to 
combustibles as indicated on the rating plate and in this 
manual.

The minimum and maximum gas inlet pressures must be 
maintained as indicated on the rating plate. Typical 
installation configurations are shown on Page 12, Figure 
17.

NOTE: Some models may receive S-hooks (P/N 
91907302) or spring hooks (P/N 91903300), rather than 
bow shackles.