AudioQuest Sidewinder 0.5 m. SIDEWINDER05 Folheto

22 AWG Solid Long-Grain Copper (LGC) Conductor (+)
Foamed PE Insulation
22 AWG Solid LGC Conductor (-)
Foil/Mylar/Foil Shield
Red PVC
Black/Red - Nylon Braid

.252 in. (6.40 mm) O.D.

A

NALOG

 A

UDIO INTERCONNECT

SIDEWINDER

At first glance, Sidewinder's design looks like a traditional coaxial cable. However, there are many very 

important differences, each of which greatly influence sound quality.

ASICS: Sidewinder has identical conductors for the positive and ground connections. Under-

neath the 100% coverage foil shield is a bare conductor, exactly the same as the insulated center conductor. 

The conductor under the shield does double duty as a low distortion audio connection, and as the drain wire 

connecting the shield to ground. 

ONDUCTORS: Both of Sidewinder's conductors are solid. Electrical and magnetic interaction between 

strands in a conventional cable is the greatest source of distortion, often causing a some what dirty harsh 

sound. Solid conductors are the most important ingredient enabling Sidewinder's very clear sound. 

ETAL: Sidewinder's LGC (Long Grain Copper) allows a smoother and clearer sound than cables using 

regular OFHC (Oxygen Free High Conductivity) copper. The "HC" in OFHC means High Conductivity. OFHC 

is a general metal industry specification as to "loss," without any concern for distortion. LGC, with it's fewer 

oxides within the conducting material, less impurities and less grain boundaries, has better performance. 

ERMINATIONS: Precision gold plated plugs are carefully attached with the very best solder. Through 

choice of flux and metallurgy, AQ solder has been optimized to make alow distortion connection. All solder, 

including "silver solder," is a poor conductor. The difference you hear between solders is a result of 

connection quality. AQ Solder does not have a high silver content because the more silver there is in solder, 

the more difficult it is to make a good connection. 

A combination of these major ingredients, and many more subtle details add up to explain how even an 

inexpensive cable like Sidewinder can sound so good.

NSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insula-

tion, circuit board materials all absorb energy (loss). Some of this energy is stored and then released as 

distortion. Sidewinder uses air filled FPE (Foamed Polyethylene) insulation on both conductors because

air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to

all the air in FPE, it causes much less of the out-of-focus effect common to other materials.