Greenheck Fan HRE-55 Manual Do Utilizador
GENERAL
Greenheck Energy Recovery units with Tempering
are thoroughly inspected and test run at the factory.
However, damage may occur during handling and
shipping. Consequently, it is important to inspect
the unit for visible and concealed damage before
beginning installation. Report any damage to the
shipper immediately. In addition, assure all
accessory items are present. Some accessory items
are stored inside the unit during shipping. Care
must be taken during installation to prevent damage
to units.
are thoroughly inspected and test run at the factory.
However, damage may occur during handling and
shipping. Consequently, it is important to inspect
the unit for visible and concealed damage before
beginning installation. Report any damage to the
shipper immediately. In addition, assure all
accessory items are present. Some accessory items
are stored inside the unit during shipping. Care
must be taken during installation to prevent damage
to units.
TABLE OF CONTENTS
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . 3
General . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . 3
Lifting . . . . . . . . . . . . . . . . . . . . . . . . . .3
Unit Weights . . . . . . . . . . . . . . . . . . . . .3
Recommended Roof Openings . . . . . . .3
Roof Curb Mounting . . . . . . . . . . . . . . .4
Duct Work Connections . . . . . . . . . . . . 4
Weatherhoods . . . . . . . . . . . . . . . . . . . 4
Electrical . . . . . . . . . . . . . . . . . . . . . . . .5
Unit Weights . . . . . . . . . . . . . . . . . . . . .3
Recommended Roof Openings . . . . . . .3
Roof Curb Mounting . . . . . . . . . . . . . . .4
Duct Work Connections . . . . . . . . . . . . 4
Weatherhoods . . . . . . . . . . . . . . . . . . . 4
Electrical . . . . . . . . . . . . . . . . . . . . . . . .5
Service Clearances . . . . . . . . . . . . . . . . 6
Evaporative Cooling Modules . . . . . 7-10
Evaporative Cooling Modules . . . . . 7-10
Evap Module Start-Up . . . . . . . . . . . . . .7
Water Control Options . . . . . . . . . . . . . .8
Trouble Shooting . . . . . . . . . . . . . . . . . .9
Maintenance . . . . . . . . . . . . . . . . . . . .10
Water Control Options . . . . . . . . . . . . . .8
Trouble Shooting . . . . . . . . . . . . . . . . . .9
Maintenance . . . . . . . . . . . . . . . . . . . .10
Water Coil Recommendations . . . . . . 11
Electric Heater Application/Operation 12
Frost Control Application/Operation .13
Dirty Filter Switch Operation . . . . . . . .13
Electric Heater Application/Operation 12
Frost Control Application/Operation .13
Dirty Filter Switch Operation . . . . . . . .13
Economizer Application/Operation . . .14
Auto Dry Cycle . . . . . . . . . . . . . . . . . . .14
Start Up Checks . . . . . . . . . . . . . . . . . . 15
Auto Dry Cycle . . . . . . . . . . . . . . . . . . .14
Start Up Checks . . . . . . . . . . . . . . . . . . 15
Fan wheel . . . . . . . . . . . . . . . . . . . . . . 15
Fan RPM . . . . . . . . . . . . . . . . . . . . . . . 16
Energy Recovery Wheel . . . . . . . . . . . 16
Coils . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Fan RPM . . . . . . . . . . . . . . . . . . . . . . . 16
Energy Recovery Wheel . . . . . . . . . . . 16
Coils . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Routine Maintenance . . . . . . . . . . . 17-18
Belts . . . . . . . . . . . . . . . . . . . . . . . . . .17
Motors . . . . . . . . . . . . . . . . . . . . . . . . .17
Blower Wheel and Fasteners . . . . . . . .17
Vibration . . . . . . . . . . . . . . . . . . . . . . .18
Filters . . . . . . . . . . . . . . . . . . . . . . . . . 18
Motors . . . . . . . . . . . . . . . . . . . . . . . . .17
Blower Wheel and Fasteners . . . . . . . .17
Vibration . . . . . . . . . . . . . . . . . . . . . . .18
Filters . . . . . . . . . . . . . . . . . . . . . . . . . 18
Coil Maintenance . . . . . . . . . . . . . . . . .19
Energy Recovery Wheel Maint . . . . . . 20
Energy Recovery Wheel Maint . . . . . . 20
Accessing Energy Recovery Wheel . . .20
Removing Wheel Segments . . . . . . . .21
Cleaning Wheel Segments . . . . . . . . .21
Removing Wheel Segments . . . . . . . .21
Cleaning Wheel Segments . . . . . . . . .21
Parts List . . . . . . . . . . . . . . . . . . . . . . . .22
Unit Trouble Shooting . . . . . . . . . . .23-24
Unit Trouble Shooting . . . . . . . . . . .23-24
STORAGE
When a unit is not going to be in service for an extended amount of time, certain procedures should be
followed to keep the fans in proper operating condition.
followed to keep the fans in proper operating condition.
• Rotate fan wheel monthly and purge grease from bearings once every three months
• Cover unit with tarp to protect from dirt and moisture (Note: do not use a black tarp as this will promote
• Cover unit with tarp to protect from dirt and moisture (Note: do not use a black tarp as this will promote
condensation)
• Energize fan motor once every three months
• Store belts flat to keep them from warping and stretching
• Store unit in location which does not have vibration
• After storage period, purge grease from fan bearings before putting fan into service
• Store belts flat to keep them from warping and stretching
• Store unit in location which does not have vibration
• After storage period, purge grease from fan bearings before putting fan into service
If storage of unit is in a humid, dusty or corrosive atmosphere, rotate the fan and purge the bearings once a
month. Improper storage which results in damage to the unit or components will void the warranty.
month. Improper storage which results in damage to the unit or components will void the warranty.
2