MASTER LOCK 1500eD Manual Do Utilizador

Página de 11
General Operation - LED Display Chart 
LED Display
Status
Condition
Arrows and center button on for 1 second.
Wake Up
When in locked sleep mode 
and center button is pressed. 
(First arrow button pressed 
counts towards code entry)
Center button lights blue and arrows flash 
with each press.
Code Entry
When in locked sleep mode 
and any arrow button is 
pressed or during code entry 
to unlock.
Center button green for 1 second. Arrows 
rotate clockwise twice.
Correct Code
After valid code is accepted, 
shackle can be pulled open.
Center button blue. Arrows flash twice.
Clear Entry
After center button is pressed 
to clear a code entry.
Center button flashes red 3 times.
Code Failed - Max. 
Length
After 12 arrow button presses 
are made.
Center button green for 1 second. Arrows 
rotate counter-clockwise twice.
Locked
After shackle is closed.
Center button fades in and out red in  
1 second, then off for 2 seconds. Repeats 
for 1 minute.
Lockout - 3 Incorrect 
Code Entries
After 3rd incorrect code entry. 
Pressing center button during 
code entry to clear the lock 
counts as incorrect entry.
Center button red for 1 second, then sleep 
mode.
Time Out
5 seconds after last button 
press in locked mode.
5 second time out, no lights on.
Time Out - Lock Not 
Opened
5 seconds after unlocking 
without raising the shackle. 
Lock relocks.
Center button flashes yellow for 4 seconds.
Low Battery
After first button press from 
locked sleep mode if battery 
voltage low.
Program Mode - LED Display Chart 
LED Display
Status
Condition
Center button white. Each arrow with a 
stored code lights until button is pressed.
Stored Code Positions
After pressing center button 2 
seconds to enter Program Mode.
Center button white. Selected arrow 
position flashes twice, then all arrows off.
Arrow Position Selection
After pressing an arrow 
followed by the center button.
Center button green. Selected arrow 
flashes 3 times. Arrows with stored codes 
light for 1 second, then sleep mode.
Arrow Position Deletion
After pressing and holding  
the selected arrow position for 
5 seconds.
Center button flashes red 6 times, then 
sleep mode.
Arrow Position Deletion 
Failed - Primary Code
After the UP position arrow is 
selected for deletion.
Center button white.
Awaiting New  
Code Entry
After center button pressed to 
enter new code.
Center button lights white and arrows 
flash with each press.
Code Entry
During new code entry.
Center button fades in and out white in  
1 second. Repeats until any button is 
pressed or timeout is reached.
Awaiting Code  
Confirmation
Waiting for code  
confirmation entry.
Center button green. Selected arrow 
flashes 3 times. Arrows with stored codes 
light for 1 second, then sleep mode.
Code Accepted
When confirmation code 
matches initial code.
Center button flashes magenta 6 times, 
then sleep mode.
Code Rejected - Invalid
When new code is invalid.
Center button flashes red 3 times, then 
sleep mode.
Code Rejected - Does  
Not Match
When confirmation code does 
not match initial code.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 
undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
7
8