Hunter Fan 42798-01 Manual Do Utilizador

42798-01  •  09/16/09  •  Hunter Fan Company

Groove 

Tab

Swing the fan up to align the ceiling mounting plate cover screw holes 

with the mounting holes on the ceiling mounting plate(2). 

Rotate the pipe/ball assembly (7) so the tab in the ceiling mounting plate 

cover (3) is secure in the hanger ball groove. Note: Your fan may have 

multiple tabs and grooves that must be aligned.

Holding the ceiling mounting plate cover (3) up with the screw holes 

aligned, partially install two ceiling mounting plate cover screws (62) into 
the holes opposite the ceiling mounting plate tabs.

 

Partially install a ceiling mounting plate cover screw (62) between the slots 

in the ceiling mounting plate cover (3). When all the holes are properly 

aligned, securely tighten all three ceiling mounting plate cover screws. 

Verify that the tabs in the ceiling mounting plate cover are still in the 

grooves of the hanger ball.

6.2

6.1

6.3

6.4