Hunter Fan 42507-01 Manual Do Utilizador

All wiring must be in accordance with national and local electrical 
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a 
qualified electrician.
Wall switches are not included. Select an acceptable general-use switch
in accordance with national and local electrical codes.
4-1.  Make sure the power to the outlet box and associated wall switch

location is still OFF.

   To connect the wires, hold the bare metal leads together and place

a wire nut over them, then twist clockwise until tight.

CAUTION: Be sure no bare wire or wire strands are visible after

making connections.

    Dual Switch Wiring:

• The bare or green ground wire from the ceiling to the green

ground wire from the ceiling plate and the green ground wire
from the fan

• The white wire from the ceiling to the white wire from the fan
• The black wire from the ceiling to the black wire from the fan
• The black/white wire from the ceiling to the black/white wire

from the fan

    Single Switch Wiring:
   If you want to, you can control both fan and light with one switch.

To do so connect the wires as follows:

• The bare or green ground wire from the ceiling to the green

ground wire from the ceiling plate and the green ground wire
from the fan

• The white wire from the ceiling to the white wire from the fan
• The black wire from the ceiling to the black and the black/

white wire from the fan

4-2.  Push all wires and wire nuts back through the ceiling plate hole

into the outlet box.

Wire Nut

Hunter Fan Company

42507-01 • 02/26/07