Hunter Fan 42503-01 Manual Do Utilizador

Hunter Fan Company 

42503-01 • 02/08/06

42503-01 • 02/08/06 

Hunter Fan Compan

All wiring must be in accordance with national and local electrical 
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a 
qualified electrician.
Wall switches are not included. Select an acceptable general-use switch 
in accordance with national and local electrical codes.
4-1.  Make sure the power to the outlet box and associated wall switch 

location is still OFF. 

    To connect the wires, hold the bare metal leads together and place 

a wire nut over them, then twist clockwise until tight.

 CAUTION:  Be sure no bare wire or wire strands are visible after 

making connections.

    Dual Switch Wiring: 

• e bare or green ground wire from the ceiling to the green 

ground wire from the ceiling plate and the green ground wire 
from the fan

• e white wire from the ceiling to the white wire from the fan
• e black wire from the ceiling to the black wire from the fan
• e black/white wire from the ceiling to the black/white wire 

from the fan

    Single Switch Wiring: 
    If you want to, you can control both fan and light with one switch. 

To do so connect the wires as follows: 

• e bare or green ground wire from the ceiling to the green 

ground wire from the ceiling plate and the green ground wire 
from the fan

• e white wire from the ceiling to the white wire from the fan
• e black wire from the ceiling to the black and the black/

white wire from the fan 

4-2.  Push all wires and wire nuts back through the ceiling plate hole 

into the outlet box.

Wire Nut