Hunter Fan 42656-01 Manual Do Utilizador
10
42656-01 • 08/14/09 • Hunter Fan Company
Step 7-1
Housing Assembly
Screw
Housing
7-1. Partially install two housing assembly screws into the housing.
7-2. To attach the light fixture, connect the upper plug connector
7-2. To attach the light fixture, connect the upper plug connector
from the motor to the lower plug connector in the light fixture
assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-3. Place the keyholes in the light fixture assembly over the partially
installed screws in the housing.
7-4. Rotate the light fixture clockwise until the screws are firmly
situated in the narrow end of the keyholes. Install the remaining
screw. Tighten all three screws securely.
screw. Tighten all three screws securely.
7-5. Install three candelabra bulbs (40 Watt maximum each).
Steps 7-2 – 7-4
Light Kit
Housing Assembly
Screw
Step 7-5
Candelabra
Bulb
Housing Assembly Screw
7 • Installing the Light Fixture
Note: In compliance with US federal energy regulations, this
ceiling fan contains a device that restricts the light kit to a
maximum of 190 Watts. Exceeding that limit or the marked
limit on this product may result in fire hazard or improper
operation.
maximum of 190 Watts. Exceeding that limit or the marked
limit on this product may result in fire hazard or improper
operation.