Hunter Fan 27188 Manual Do Utilizador

41797-01  •  07/06/10  •  Hunter Fan Company

1.No functions operate.

Main Power not restored.

Replace fuse. Turn ON circuit breaker. Turn ON wall switch.

Fan pull chain not set to High. Set fan pull chain to High speed.
Light pull chain not set to ON. Set light kit to ON. 
Receiver wiring incorrect.

Verify wiring connections.

Transmitter and receiver DIP 

switches do not match.

Set transmitter and receiver to same DIP switch setting.

Battery too weak.

Replace with new, 12 Volt alkaline battery.  Refer to 

“Transmitter Installation”, Section 6. 

2.Operates only at close range. Signal blocked from reaching 

receiver.

Extend antenna into ceiling box, or move it for better 

reception. 

Battery too weak.

Replace with new, 12 Volt alkaline battery.  Refer to 

“Transmitter Installation”, Section 6. 

Interference

Change the DIP switch settings on the remote receiver and 

transmitter,

3.Inconsistent operation. 

Signal partially blocked from 

reaching receiver.

Extend antenna into ceiling box, or move it for better 

reception. 

RF interference.

Turn OFF wall switch for 5 seconds, then turn back ON.

Continuing RF interference.

Change jumper settings to a different code in both transmitter 

and receiver.