Hunter Fan 45041-01 Manual Do Utilizador

Página de 16
14
45041-01  •  09/30/09  •  Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Uninstalling the Light Fixture
7-14.  To uninstall the light fixture, first disconnect the plug connectors 
between the black wire and the black/white wire.
7-15.  Disconnect the plug connectors between the two white 
wires.
7-16.  Uninstall the connector and washer from the end of the 
light fixture inside the lower switch housing.
7-17.  Unscrew the threaded rod of the light fixture from the lower 
switch housing.
7-18.  Remove the light fixture from the lower switch housing 
pulling disconnected wires through the hole in the center of 
the lower switch housing.
 
Note:  When removing the wires, pull the thin plug 
connector (male) through first, and then pull the other plug 
connector (female) through the hole.
7-19.  Install the dummy terminals (included in the sack parts) on 
the two disconnected wires in the lower switch housing.
7-20.  Install the switch housing cap and plug button to the lower 
switch housing.
7-21.  Once you have uninstalled the light fixture, continue
 
with step 7-6.
Lower Switch 
Housing
Threaded Rod
Steps 7-16 – 7-18
Male Dummy 
Terminal
Female Dummy 
Terminal
Step 7-20
Cap
Plug Button